industrial dc/dc-converter tcl-dc series, 24 to 60 watt features ultra-wide input voltage range output voltage adjustable overload and short circuit protection low ripple and noise i/o isolation 1500 vdc compact, slim plastic case reliable snap-on mount on din-rail bracket for wall mount included 3-year product warranty in the tcl range of din-rail power supplies are 6 models for dc input voltage avail - able. the wide input ranges of 9.5C18 vdc resp. 18C75 vdc means these models can be operated from all popular dc supply voltage systems. with tightly regulated output voltage these dc/dc converters provide a reliable power source for sensitive loads in industrial process controls, factory automation and other equipment exposed to a critical industrial environment. further applica - tions for these converters are isolation of a specifc load or refreshing the 24 v bus voltage. easy installation is provided with snap-on mounting on din-rails and detachable screw terminal block. order code input voltage range output voltage output current max. tcl 012-124 dc 9.5 C 18.0 vdc 24 vdc 1.0 a tcl 024-105 dc 5 vdc 5.0 a tcl 024-112 dc 18 C 75 vdc 12 vdc 2.0 a tcl 024-124 dc 24 vdc 1.0 a tcl 060-112 dc tcl 060-124 dc 18 C 75 vdc 12 vdc 24 vdc 5.0 a 2.5 a models page 1 of 3 ul 50 8 cb scheme http://www.tracopower.com
industrial dc/dc-converter tcl-dc series 24 to 60 watt input specifications input power at no load 1.0 watt max. start-up voltage/under voltage shut down tcl 012 model: 8.4 vdc / 7.6 vdc tcl 024 & tcl 060 models: 17.2 vdc / 15.7 vdc reverse polarity protection by internal fuse efficiency 86 % typ. output specifcations output voltage adj. range 5 vdc model: 5.0 C 5.25 vdc 12 vdc models: 12.0 C 15.0 vdc 24 vdc models: 24.0 C 28.0 vdc regulation C input variation vin min. to vin max. 0.5 % max C load variation 0...100% 0.5 % max ripple and noise (20 mhz bandwidth) <50 mv pk-pk electronic short circuit protection current limitation at 110 % typ. (constant current, automatic recovery) overvoltage protection, trigger point 5 vdc model: <6.5 v 12 vdc models: <24 v 24 vdc models: <42 v general specifcations temperature ranges C operating C25c to +70c max. C storage (non operating) C25c to +85c temperature derating 1.5 %/k above +50c humidity (non condensing) 95 % rel. h max. temperature coeffcient 0.02 %/k switching frequency 55 C 180 khz depending on load (frequency modulation) isolation voltage (60 sec.) C input/output 1500 vdc reliability, calculated mtbf at +25c (according to iec 61709) >2.5 mio h safety standards C information technology equipment iec 60950-1, en 60950-1 (output selv), ul std. 60950-1 (2nd edition) +am1:2011, can/csa-c22.2 no. 60950-1-07 +am1:2011 C industrial control equipment ul 508 C electronic equipment for power installation en 5 0178 C electrical equipment for machines en 60204 safety approvals C cb test certificate (iec 60950-1) www.tracopower.com/products/tcl-cb.pdf C ul approval www.ul.com -> certifications ul 508c listed, csa c22.2 no.14 file e210002 C csa certification ul 60950-1, csa 60950-1-03 www.tracopower.com/products/tcl-csa.pdf C gs certification www.tracopower.com/products/tcl060dc_gs.pdf electromagnetic compatibility (emc), emissions en 61000-6-3 C conducted ri suppression on input en 55022 class b C radiated ri suppression en 55022 class b electromagnetic compatibility (emc), immunity en 61000-6-2 C electrostatic discharge (esd) en 61000-4-2 4 kv / 8 kv C radiated rf field immunity en 61000-4-3 10 v/m C electrical fast transient / burst immunity en 61000-4-4 level 3 C surge immunity en 61000-4-5 level 3 C immunity to conducted rf disturbances en 61000-4-6 10 vrms environmental compliance C reach www.tracopower.com/products/reach-declaration.pdf C rohs rohs directive 2011/65/eu case protection ip 20 ( iec 60529) enclosure material plastic ul 94v-0 rated mounting din-rails as per en 50022-35x15/7.5 (snap-on with self-locking spring) bracket for wall/chassis mount included installation instructions www.tracopower.com/products/tcl-dc-inst.pdf all specifcations valid at nominal input voltage, full load and +25 c after warm-up time unless otherwise stated. page 2 of 3 http://www.tracopower.com
industrial dc/dc-converter tcl-dc series 24 to 60 watt rev. october 18. 2013 page 3 of 3 27 (1.06) 2.2 (0.09) 100.0 (3.94) 75.0 (2.95) dc-on led output voltage adjust input 1 2 3 output 1 2 output input 1 + vout 1 protective earth 2 C vout 2 Cvin 3 +vin weight: 140g (4.9 oz) dimensions in [mm], () = inch tolerances: 0.5 (0.02) case dimensions wall mounting bracket instead on a din-rail, the modules can be also mounted on a chassis or wall with help of a mounting bracket which is supplied as standard with each converter 75.0 (2.95) 100.0 (3.94) 3.2 (0.13) 45 (1.77) dc-on led output voltage adjust output 1 1 2 2 input 1 2 3 tcl 012 and tcl 024 models tcl 060 model weight: 265 g (9.4 oz) output input 1 + vout 1 protective earth 2 C vout 2 Cvin 3 +vin sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com
|
